Removing rear blocks?
Thread Starter
|
New User
Joined: Jul 2017
Posts: 15
Likes: 0
Removing rear blocks?
2017 f250 has anyone removed the rear blocks? I was wondering if anyone had done it and how it worked out, if I leave that alone can I put a spacer In the front that will get the front 1/2" higher? It looks like the 2" spacers leave the rear a little higher and what is the biggest spacer I can use up front? Thanks for any replies
More Turbo
Joined: Jul 2013
Posts: 708
Likes: 161
From: Everett, Washington
I swapped the stock Blocks out to 1.5" Blocks to level mine. Didn't want to level the front end as it would have put my fifth wheel nose up.
Read this... https://www.ford-trucks.com/forums/1...endations.html
Read this... https://www.ford-trucks.com/forums/1...endations.html
Posting Guru
Joined: Nov 2010
Posts: 2,027
Likes: 7
From: 46th State
I swapped the stock Blocks out to 1.5" Blocks to level mine. Didn't want to level the front end as it would have put my fifth wheel nose up.
Read this... https://www.ford-trucks.com/forums/1...endations.html
Read this... https://www.ford-trucks.com/forums/1...endations.html
Mountain Pass
Joined: Apr 2017
Posts: 115
Likes: 2
Before you buy the 1.5 coil spacer I would do the 1.5 block in the rear. Even though it still measures 1" high at the rear wheel well, it looks level or pretty damn close. I'm thinking by adding 1.5" to the front will look nose high. Just something to consider..
Thread
Thread Starter
Forum
Replies
Last Post
