Kick Panel Rust Repair Write Up?
Thread Starter
|
Elder User
Joined: Jan 2014
Posts: 898
Likes: 3
From: Chillicothe, IA
Kick Panel Rust Repair Write Up?
I know I have read a write up of repairing a kick panel along with a floor pan replacement, but I have been searching for 3 hours and can not for the life of me find it.
I am trying to get geared up to finish my floor repairs. Selling a few items to get myself a welder. Working on cleaning up and getting the garage insulated so as to have a little heat. But I have to replace my kick panels and the little angle bracket type piece that the floor pan sits on at the door side. Just wanting to revisit the write up of replacing these pieces.
I believe it was by a regular contributor, and possibly in a build thread. I will keep looking but if this is yours, please link it below. Or if you know who might have written it, let me know.
Thanks
I am trying to get geared up to finish my floor repairs. Selling a few items to get myself a welder. Working on cleaning up and getting the garage insulated so as to have a little heat. But I have to replace my kick panels and the little angle bracket type piece that the floor pan sits on at the door side. Just wanting to revisit the write up of replacing these pieces.
I believe it was by a regular contributor, and possibly in a build thread. I will keep looking but if this is yours, please link it below. Or if you know who might have written it, let me know.
Thanks
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
I covered that in my build thread, I'll find the post and update.
Update:
Repairing the kick panel on my build starts here:
https://www.ford-trucks.com/forums/8...l#post12881296
Update:
Repairing the kick panel on my build starts here:
https://www.ford-trucks.com/forums/8...l#post12881296
Thread Starter
|
Elder User
Joined: Jan 2014
Posts: 898
Likes: 3
From: Chillicothe, IA
Dag blam it!!! I spent almost an hour going from page 1 in that post to 47. I seen your repair on the passenger side and said, nope, not in here. It is on page 48.
Thank you kind sir.
Thank you kind sir.
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
Been there, done that I don't know how many times. It's either that, or I'll look and look, then decide it must be further back and skip several pages only to find that I've skipped right over what I was looking for
.
Thread
Thread Starter
Forum
Replies
Last Post
Uni Moe
1967 - 1972 F-100 & Larger F-Series Trucks
5
Dec 29, 2014 05:35 PM
