Glowplug advice
Thread Starter
|
Senior User
Joined: Apr 2007
Posts: 144
Likes: 1
I'm about to order GP harnesses. I'm a little concerned about getting the correct part number and any help to easy my concerns would be appreciated. I have a 12/03 build date, ICP is on the valve cover just above the GPCM, and a Blue Sticker on same Valve cover stating 2004. I can share my last 8 of VIN if needed.
I've been getting people on the phone where the person that answered the phone were brand new and in training. This happened at the Ford Dealer and another very reputable business with high standing on FTE 6.0L section. The Ford Dealer just gave me the ****-12A690-** part of the part number at first, but then I called back and he gave me the beginning of "4C3Z". In looking for these -AA and -BA, I have received mixed results as being compatible with my truck. Some say I need 2Z. I think the 4C2Z is much easier to get quickly, but I'm still searching.
I would appreciate it someone with a similar build date or competent knowledge of what part I need, would share the part number. Thanks
I've been getting people on the phone where the person that answered the phone were brand new and in training. This happened at the Ford Dealer and another very reputable business with high standing on FTE 6.0L section. The Ford Dealer just gave me the ****-12A690-** part of the part number at first, but then I called back and he gave me the beginning of "4C3Z". In looking for these -AA and -BA, I have received mixed results as being compatible with my truck. Some say I need 2Z. I think the 4C2Z is much easier to get quickly, but I'm still searching.
I would appreciate it someone with a similar build date or competent knowledge of what part I need, would share the part number. Thanks
Cargo Master
Joined: Aug 2012
Posts: 2,840
Likes: 921
From: Kaufman TX
Check out this thread. It gets educational around post #8.
https://www.ford-trucks.com/forums/1...g-harness.html
Apparently the 2z is 2 feet longer on the connection end. You probably don't need that extra length, but it would work.
https://www.ford-trucks.com/forums/1...g-harness.html
Apparently the 2z is 2 feet longer on the connection end. You probably don't need that extra length, but it would work.
Lead Driver
Joined: Dec 2006
Posts: 6,496
Likes: 94
From: So. Jersey
Thread
Thread Starter
Forum
Replies
Last Post
Farmboy1539
1994.5 - 1997 7.3L Power Stroke Diesel
1
Oct 19, 2015 09:37 AM
