Help with crank no start

Reply Subscribe

Thread Tools

Search this Thread

Nov 25, 2016 | 02:25 PM

gb'sfx4

Thread Starter

old enough to know better

Joined: Nov 2006

Posts: 1,418

Likes: 0

From: republic of kalifornia

Help with crank no start

Anyone near Lodi, Ca. with a scan tool willing to help with a no start issue.
Hope everyone had a great thanksgiving!

Nov 25, 2016 | 07:42 PM

gb'sfx4

Thread Starter

old enough to know better

Joined: Nov 2006

Posts: 1,418

Likes: 0

From: republic of kalifornia

Well, I checked voltage at the ficm and it had 48v koeo
but dropped to 17v and bounced around to 37v while cranking
so I shipped it off to Ed today

Nov 26, 2016 | 11:09 AM

r2millers

Postmaster

Joined: Sep 2010

Posts: 3,472

Likes: 2

From: Southern Cal

Wow!
I would have expected an oil, o ring issue on the high pressure side.
Any symptoms ahead of time to suggest something was starting to go wrong?
Hope all turns out well.

Nov 26, 2016 | 12:55 PM

gb'sfx4

Thread Starter

old enough to know better

Joined: Nov 2006

Posts: 1,418

Likes: 0

From: republic of kalifornia

Could be, but all I had was a volt meter so I know the ficm is toast.
I won't know till I get it back along with the scan gauge Im buying from ficmrepair

Nov 26, 2016 | 08:27 PM

FICMrepair.com

Former Vendor

Joined: Feb 2010

Posts: 1,803

Likes: 5

Quote:

Originally Posted by gb'sfx4

Could be, but all I had was a volt meter so I know the ficm is toast.
I won't know till I get it back along with the scan gauge Im buying from ficmrepair

Thanks for the business!