I'm getting ready to swap a c6 to a ZF5. While searching for kits, etc., I found a co. that machines the shifter and housing to produce a shorter throw, and tighter shift, for $200. Has anyone tried it?

http://www.ebay.com/itm/Short-Throw-Shifter-Kit-for-ZF-Ford-ZF-5-Speed-Transmissions-ZF-S542-ZFS-547/281942643349?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D35375%26meid%3Dfa48fadecaa94adda3b66de676337454%26pid%3D100033%26rk%3D1%26rkt%3D3%26sd%3D281942643349

 

I had one on one of my trucks. It came with it. SURLY NOT WORTH the $200. Early noticeable shorter shifts. Mater of fact I didn't even know it was there until I pulled the trans to put the clutch in(I also have 5 other ZF5 trucks)

 

On my 89 f-250 with the zf s5-42 I can put it in to gear but when I let the clutch out it doesn't move in any gear. Any ideas