Need help with my engine/transmission problem
Thread Starter
|
New User
Joined: Oct 2015
Posts: 10
Likes: 0
Need help with my engine/transmission problem
Hey,
New here and was wondering if someone could give me some advice on my current problem.
I own a 1948 ford pickup (f-3 i think). It came with the original 4 speed manual transmission (has a pto), drive shafts, and rear end. The problem is it didn't come with the original motor. It did come with a ford flathead v8, late series 239 c1ba. (think out of a 52 car?) and it also came with the bell housing and the 3 speed transmission that is original and bolts up to the engine. I would like to use the 4 speed manual with the newer engine but cant seem to find an adapter plate for it. I have found other ones but since i have a late series 239 its flatish on the bottom. Maybe im just missing something. Any help would be greatly appreciated. I can add some pictures of my engine and transmission, if that would help.
Thanks very much
New here and was wondering if someone could give me some advice on my current problem.
I own a 1948 ford pickup (f-3 i think). It came with the original 4 speed manual transmission (has a pto), drive shafts, and rear end. The problem is it didn't come with the original motor. It did come with a ford flathead v8, late series 239 c1ba. (think out of a 52 car?) and it also came with the bell housing and the 3 speed transmission that is original and bolts up to the engine. I would like to use the 4 speed manual with the newer engine but cant seem to find an adapter plate for it. I have found other ones but since i have a late series 239 its flatish on the bottom. Maybe im just missing something. Any help would be greatly appreciated. I can add some pictures of my engine and transmission, if that would help.
Thanks very much
Thread
Thread Starter
Forum
Replies
Last Post
Fat Fendered Ford
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
May 8, 2006 07:26 AM
