No Wait to Start light/GPL problem
Thread Starter
|
New User
Joined: Feb 2005
Posts: 5
Likes: 0
No Wait to Start light/GPL problem
If the glow plug relay goes out would that make the WTS light stop working? I checked the #30 fuse and it's ok, and all the fuses.
I had crossed over the Glow Plug Relay with a wrench a few times to get it to start and now it's not working. ( I know probably not a good idea)
2000 7.3
I had crossed over the Glow Plug Relay with a wrench a few times to get it to start and now it's not working. ( I know probably not a good idea)
2000 7.3
Senior User
Joined: Jun 2010
Posts: 483
Likes: 1
From: Washington
Just the light isn't working or both the light and the GPR??
I don't think the two are connected but I could be wrong. I know when my GPR went out the light still worked. And the time the light is on is not the actual time the GPR is working, its just a set time thing basically. And crossing the two terminals on the GPR shouldn't cause any problems if the GPR is already bad all your doing is by passing the relay.
I don't think the two are connected but I could be wrong. I know when my GPR went out the light still worked. And the time the light is on is not the actual time the GPR is working, its just a set time thing basically. And crossing the two terminals on the GPR shouldn't cause any problems if the GPR is already bad all your doing is by passing the relay.
Thread
Thread Starter
Forum
Replies
Last Post
utahxjer
1999 - 2003 7.3L Power Stroke Diesel
5
Dec 10, 2013 08:49 PM
basstardo
1999 - 2003 7.3L Power Stroke Diesel
1
Jun 29, 2004 02:40 PM
