Intake Manifold Issue
Thread Starter
|
New User
Joined: Sep 2013
Posts: 13
Likes: 0
Intake Manifold Issue
Took off my Holley 600 pfm carb to rebuild and find underneath the edelbrock spacer and the multiple layers of old gaskets a small peanut sized hole adjacent to the 4v holes. Its in the middle about an inch from either hole and on the passenger side of the manifold. Do i plug it, leave it half open(which is what happens when carb gasket and spacer are installed) or what? 
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
That is where the EGR valve pulls the exhaust. There used to be a spacer that went between the carb and manifold, the EGR valve bolted on the back of it.
If you don't have the EGR spacer you'll need to seal the hole somehow.
If you don't have the EGR spacer you'll need to seal the hole somehow.
Logistics Pro
Joined: Feb 2000
Posts: 3,957
Likes: 50
From: Mesa
Thread
Thread Starter
Forum
Replies
Last Post
pete moffat
1961 - 1966 F-100 & Larger F-Series Trucks
11
Nov 8, 2013 12:41 PM
LARIAT 85
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
Jul 26, 2011 11:14 AM
nuwave
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Jun 26, 2007 10:28 PM
Greg 79 f150
Fuel Injection, Carburetion & Fuel System
1
May 23, 2004 11:59 AM
