!!HELP!! Carburetor Problems
Thread Starter
|
Posting Guru
Joined: Jul 2011
Posts: 2,104
Likes: 0
From: Virginia Beach, VA
!!HELP!! Carburetor Problems
I cannot get this truck to start. I have torn down the carb 3 times to find the clog. Everytime I think I get it, it still doesn't work. Its has a brand new filter on it that is clear.
Can you blow into a carb? Just seems like the problem is before the bowl. I feel so stupid cause this carb is so simple.
Its a stock 2 barrel 78. Anybody help me out?
Can you blow into a carb? Just seems like the problem is before the bowl. I feel so stupid cause this carb is so simple.
Its a stock 2 barrel 78. Anybody help me out?
Post Fiend
Joined: Apr 2008
Posts: 8,261
Likes: 15
From: Big Sky Country
Not only can you, but it's a must to be certain all the passages and orifices are free of any debris.
After a good soak in some Berryman's B12 blow out the carb with compressed air.
After a good soak in some Berryman's B12 blow out the carb with compressed air.
Thread Starter
|
Posting Guru
Joined: Jul 2011
Posts: 2,104
Likes: 0
From: Virginia Beach, VA
Okay figured it out, now I have a different problem. Now that I get fuel into the carb. Now fuel is coming out the two holes on the top of the carb. Where do I look now?
The carb gasket was holding down the needle in the bowl. The is fixed now.
Maybe the float is not set to the right level now?
The carb gasket was holding down the needle in the bowl. The is fixed now.
Maybe the float is not set to the right level now?
Post Fiend
Joined: Mar 2011
Posts: 8,501
Likes: 4
From: Lynchburg, VA
Okay figured it out, now I have a different problem. Now that I get fuel into the carb. Now fuel is coming out the two holes on the top of the carb. Where do I look now?
The carb gasket was holding down the needle in the bowl. The is fixed now.
Maybe the float is not set to the right level now?
The carb gasket was holding down the needle in the bowl. The is fixed now.
Maybe the float is not set to the right level now?
Elder User
Joined: Apr 2008
Posts: 542
Likes: 0
From: Dixon, IL
With today's junk ethanol fuels, they constantly gum up my carbs if I don't run stuff very often. For that reason, I always put some seafoam/Lucas/ Berryman's Chemtool in the tank.
When was the last time the carb was rebuilt? Mine was leaking out the top until I rebuilt it. Cost me all of $16.
When was the last time the carb was rebuilt? Mine was leaking out the top until I rebuilt it. Cost me all of $16.
Post Fiend
Joined: Mar 2011
Posts: 8,501
Likes: 4
From: Lynchburg, VA
On the 2150, 7/16" from the top of the bowl.
Trending Topics
Thread Starter
|
Posting Guru
Joined: Jul 2011
Posts: 2,104
Likes: 0
From: Virginia Beach, VA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread
Thread Starter
Forum
Replies
Last Post
Patrick2010
1973 - 1979 F-100 & Larger F-Series Trucks
8
Jan 14, 2011 07:54 PM
