SWAMPS IDM
Thread Starter
|
Senior User
Joined: Dec 2012
Posts: 198
Likes: 0
SWAMPS IDM
Just seeing how everyone feels about Swamps IDM vs a stock120v SD IDM.
The IDM in the 96 is full of water and will need to be replaced/rebuilt. Fromwhat I have been reading the swamps IDM looks like it’s about the same price asa stock 120v IDM out of a SD. Plus swamps offers a one year warranty on theirunits.
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
Just seeing how everyone feels about Swamps IDM vs a stock120v SD IDM.
The IDM in the 96 is full of water and will need to be replaced/rebuilt. Fromwhat I have been reading the swamps IDM looks like it’s about the same price asa stock 120v IDM out of a SD. Plus swamps offers a one year warranty on theirunits.
The IDM in the 96 is full of water and will need to be replaced/rebuilt. Fromwhat I have been reading the swamps IDM looks like it’s about the same price asa stock 120v IDM out of a SD. Plus swamps offers a one year warranty on theirunits.
High voltage/high frequency Injection Driver Module - Swamp's Diesel Performance
Fleet Mechanic
Joined: May 2011
Posts: 1,414
Likes: 10
From: Thornhill , Ontario
It is like 400 plus bucks ..But it is more than the resistor I beleive, it has another modification......I just paid a Computer geek to do 3 for me ...I paid 100 bucks for each one and parts (5 resistors) one was nfg so I have 1 resistor left...Shipping was like 3 times more than the resistor.....http://www.digikey.com/product-detai...594877?cur=USD was 80 bucks shipped ( 45 of that was the Special RTV) and I paid the kid 50 bucks...took hour 1 hr to do three so they cost me 150 bucks each total ....I had them all cleaned and ready to solder and then I did the sealing up....The write-up is on here ...most guys do it themselves but I don't mess with electronics myself ..I'd rather pay someone
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
Thread Starter
|
Senior User
Joined: Dec 2012
Posts: 198
Likes: 0
Thanks for the advice every one. Found a 2000 SD with a 120v unit and it seems to be working good. Sending the ECU back to DP tuner for some softer transmission shift points and ordering O ring kits for the oil cooler and fuel filter housing.
Fleet Owner
Joined: Aug 2004
Posts: 20,419
Likes: 197
From: AZ
I took it out of the mule and put it into the mare. When I'm done with the mare I'll update that signature. No, I didn't see any improvement over my 140 IDM. Maybe its doing stuff that I'm not aware of??
Trending Topics
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Hotshot
Joined: Dec 2005
Posts: 14,376
Likes: 605
From: evansville in
BUT you are in love with the mare I hope? lol
it sure cant hurt...and the fella is buying one anyway..what the hey.
Thread
Thread Starter
Forum
Replies
Last Post
keqwow
1948 - 1956 F1, F100 & Larger F-Series Trucks
29
May 18, 2011 10:49 AM
partsman01
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
10
Aug 27, 2008 02:14 PM