ford dully
Thread Starter
|
Freshman User
Joined: Oct 2012
Posts: 36
Likes: 0
ford dully
1997 ford f 350 2 wheel drive.it seems like my brakes act weird to me. ibeen a fors man my whole life. this only 2 7.3 i had, it seemd when i press brakes and not hard the anti kicks in to soon or it seems like the back wheels lock up. schould i replace the anti brake sencors they dont cost much
Thread Starter
|
Freshman User
Joined: Oct 2012
Posts: 36
Likes: 0
i have replaced master cyl and bleed brakes. When I turn truck on brakes will slowly go to floor
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 104
From: Ashland City, TN
Check the booklet as to bleed to the front or back line first. just crack it open and bleed it out. There will be air in the master.
Then you must bleed the RABBS unit under the truck. it's on the frame rail strait down from the dash on the drivers side.
Then bleed the rear brakes.
Bleed the rabbs unit again. bleed the rear brakes and then bleed the front.
Trending Topics
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 104
From: Ashland City, TN
Gravity bleeding does work if you get the adjustments right and you can keep an eye on them.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Fleet Owner
Joined: Aug 2004
Posts: 20,419
Likes: 197
From: AZ
I crack it open, let it drip as I tap on it with a small hammer, then close it. I'll do this several times, then the next day do it again. Its not fast but works for me. As its sitting inbetween letting it drip I'll tap it with a hammer.
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 104
From: Ashland City, TN
Yeah, if you get air in the system and it gets to the rabbs, its a pain to bleed.
Might have to tap on it a bit to make sure the bubbles jar loose.
If you get air in this thing your brakes will never work.
Might have to tap on it a bit to make sure the bubbles jar loose.
If you get air in this thing your brakes will never work.
Thread
Thread Starter
Forum
Replies
Last Post
JTdesert
Brakes, Steering, Suspension, Tires, & Wheels
22
Nov 9, 2009 03:55 PM
dugoodm
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
Feb 12, 2008 09:06 AM