Clutch Bell crank issues
Thread Starter
|
More Turbo
Joined: Sep 2002
Posts: 515
Likes: 1
From: Windsor, CO
Clutch Bell crank issues
This is NOT the typical small plastic bushing issue where it attaches to the slave cylinder. I have that permanent fix done already, but I actually have play in the bellcrank itself where it goes through the firewall bracket. Bracket is solid and firewall is not torn. It appears to be a bad bushing or something up there on the PS of bellcrank. Anyone know if this is a serviceable part through Ford?
The Bell crank is actually moving around 1/4" in each direction here:
The Bell crank is actually moving around 1/4" in each direction here:
Laughing Gas
Joined: Oct 2009
Posts: 882
Likes: 11
From: Eastern CT
Thread
Thread Starter
Forum
Replies
Last Post
Roadhammer92
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
5
Nov 28, 2011 11:20 PM
ccarrier
1994.5 - 1997 7.3L Power Stroke Diesel
18
Jun 22, 2010 08:49 AM
asauppee
Clutch, Transmission, Differential, Axle & Transfer Case
2
Feb 21, 2006 03:05 PM
