Radius Arms Bracket Bolts
Thread Starter
|
Freshman User
Joined: Sep 2012
Posts: 46
Likes: 0
Radius Arms Bracket Bolts
I recently bought a set of radius arm brackets for my 1994 F150 4x4 off of craigslist, and they did not come with any bolts. Does anybody happen to know the bolt diameter and length of the required bolts so that I can pick some up on my way home from work today? I believe there are two different sizes, and I have had no luck in finding a listing online.
Any help will be greatly appreciated.
Any help will be greatly appreciated.
Thread Starter
|
Freshman User
Joined: Sep 2012
Posts: 46
Likes: 0
Great thank you. Do I need 6 or 8 of them? At the parts stores they show 4 bolts for each side, but one is larger than the other 3.
Thanks again.
Thanks again.
Elder User
Joined: Feb 2002
Posts: 636
Likes: 0
From: Portage Twp, PA
Been a couple years since I changed my radius rod bushings, but IF (and it's a big if) I remember correctly, three bolts on each side are M10, and one is an M12. I think I used a coarse thread, but in this case, the finer the better.
As others have mentioned, SAE bolts would probably do the job just fine...but metric bolts will fit the holes a little better.
Pat
As others have mentioned, SAE bolts would probably do the job just fine...but metric bolts will fit the holes a little better.
Pat
Thread
Thread Starter
Forum
Replies
Last Post
Wyokaboy
1987 - 1996 F150 & Larger F-Series Trucks
3
Dec 15, 2007 10:59 PM
