Window motor problem
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 173
Likes: 0
From: Baytown, TX
Window motor problem
The other day I fixed the notorious door lock actuator problem by installing the new motors. But on the passenger side door after I installed it and put everything back together the window rolls down 10x slower. I had to move the track that the window rolls on to get the actuator back in. I don't know if I bent it or what. Can I fix it myself or should I take it to a shop? It is really bugging me bad.
Postmaster
Joined: Jan 2009
Posts: 2,667
Likes: 1
From: Glen Rose,Texas
I would check to see if you have something in a bind.
If these are the same as many others,there is some plastic grommets/bearrings in the motor that will get chewed up and the window will be slow or not at all.Most parts stores have the part.
If these are the same as many others,there is some plastic grommets/bearrings in the motor that will get chewed up and the window will be slow or not at all.Most parts stores have the part.
Thread
Thread Starter
Forum
Replies
Last Post
Fordownsall
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
13
Mar 25, 2011 06:54 PM
