Does anyone have a source for a 95/96 MAF 5.0 intake hose? My 86 has the mass air conversion, and I the need to setup that splits the larger intake into the dual throttle body. Can't find one in any of the boneyards around here, nor on eBay. Any help would be appreciated.

Thanks,

 

Your best luck is to check your local junkyards.

 

Thaks Alex...been working the boneyards with no luck. I'll keep checking them though.

 

No problem, Bill.

Don't forget that there is the classifieds section here on FTE. Maybe post a Wanted ad for it. I'll keep an eye out online to see if I can find one for you.

 

Just found this on eBay.

1994-97 Ford F150 F250 F350 Bronco 302 351W Mass-Air MAF Air Intake System | eBay

Price is a little steep.. and I'm assuming you only need the section of hose that splits into 2, and not the airbox cover, sensor, and intake snorkel?

 

Thanks Alex. You're right...that's very steep. All I really need are the two short rubber hoses after the split. Both cracked on mine, and I haven't been able to find a universal replacement. The speed density type won't work because of where you'd need to cut them.

 

Ah, I see. Maybe you'll have to make something from scratch if you can't find anything. I'll keep your thread bookmarked if I come across just the hose.

- Alex

 

Just in case someone else runs into the problem with the hoses at the throttle body splitting, a universal flex hose with the right measurements is the Goodyear 53611. Dimensions are 2 1/4 x 11 inches.