Where do these stickers go?
#2
Geez Louise, you're doing a full resto, but you don't have the 1964/72 Ford Truck Parts Catalog? Probably don't have Dennis Carpenter's 1957/66 truck repro parts catalog either.
There were more decals on these trucks originally, besides what you pictured. One may be for a later model, as I don't recognize it. Another, AFAIK, was only installed on cars.
Look at the ID number printed on the first decal, post what it is...I cannot make it out.
It woulda been beneficial to all if you'd posted this pic horizontally so the decals could be read, instead of posting it sideways. You may have eyes like a flounder, dunno anyone else that does.
There were more decals on these trucks originally, besides what you pictured. One may be for a later model, as I don't recognize it. Another, AFAIK, was only installed on cars.
Look at the ID number printed on the first decal, post what it is...I cannot make it out.
It woulda been beneficial to all if you'd posted this pic horizontally so the decals could be read, instead of posting it sideways. You may have eyes like a flounder, dunno anyone else that does.
#3
#4
Center one goes in the glove box. But depending on the part number in the corner it cannot be past C6 for the first two digits.
Other two are later.
First silver one is the federal standards certification that goes on the drivers door. Not ever applied to a 65 66.
Third one is the engine family decal for the valve cover, Again not used on 65 66 engines.
So all three may be incorrect for your application.
Garbz
Other two are later.
First silver one is the federal standards certification that goes on the drivers door. Not ever applied to a 65 66.
Third one is the engine family decal for the valve cover, Again not used on 65 66 engines.
So all three may be incorrect for your application.
Garbz
Thread
Thread Starter
Forum
Replies
Last Post
TxStang2010
1961 - 1966 F-100 & Larger F-Series Trucks
2
06-20-2014 04:26 PM
rwkinch
1961 - 1966 F-100 & Larger F-Series Trucks
13
01-18-2013 08:13 PM