part # ?
Tuned
Joined: Apr 2009
Posts: 307
Likes: 2
From: OR
Hotshot
Joined: Oct 2003
Posts: 17,791
Likes: 99
From: Ashland City, TN
I replaced mine one time, it lasted 2 weeks.
It also costs more than the clutch rod replacement fix.
Or damn close.
And this was on my f150, not my PSD.
Which means, less stress on that part cause of smaller PP.
It also costs more than the clutch rod replacement fix.
Or damn close.
And this was on my f150, not my PSD.
Which means, less stress on that part cause of smaller PP.
Lead Driver
Joined: Oct 2003
Posts: 8,476
Likes: 37
From: Madison, WI
Second cheap alternative, your friend might "bite" on this - 7/16" drill stop collar on the ball, where it sticks through the eyelet. You have to cut the four tabs of the craptastic plastic bushing. Variant - replace the plastic bushing with a piece of brass tubing, 1/2"OD x 7/16"ID.
Thread
Thread Starter
Forum
Replies
Last Post
grizzley30814
1994.5 - 1997 7.3L Power Stroke Diesel
5
May 20, 2018 09:47 AM
Eaglefixer
1983 - 2012 Ranger & B-Series
2
Nov 30, 2009 12:24 PM
