Drive Shaft
Thread Starter
|
New User
Joined: Apr 2012
Posts: 18
Likes: 0
From: WI
Drive Shaft
I need to find the best option for converting drive shaft for 2000 F350 SD FWD dually from 137 in wheel base to 162 in. Thought it would not be too difficult to pick a good used one up out of a bone yard. Not so did national search and found one in Missouri.
Any suggestions on best way to go or places where one can be found.
Cost from Ford dealer new will be 514.00 just would like to get by a little cheaper unless it is worth it. Cost vs benefits I guess.
Thanks in advance Westy:
Any suggestions on best way to go or places where one can be found.
Cost from Ford dealer new will be 514.00 just would like to get by a little cheaper unless it is worth it. Cost vs benefits I guess.
Thanks in advance Westy:
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
I would check around locally for a "driveshaft shop" - they can make up a driveshaft to do whatever it is you want it to, and balance it.
You might try asking at your local auto parts store (not the big brand-name ones, a small mom-and-pop type place), or machinist.
You might try asking at your local auto parts store (not the big brand-name ones, a small mom-and-pop type place), or machinist.
Lead Driver
Joined: Nov 2008
Posts: 8,450
Likes: 70
From: South Jersey
try Tom Woods, his the best in the business
Tom Wood's Custom Drive Shafts - Tom Woods Custom Drive Shafts Custom Driveshafts Specialist
Tom Wood's Custom Drive Shafts - Tom Woods Custom Drive Shafts Custom Driveshafts Specialist
Thread
Thread Starter
Forum
Replies
Last Post
rickscott2
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
14
Jun 19, 2014 11:51 AM
