Installing New Spring Clamps...
Thread Starter
|
Junior User
Joined: Sep 2011
Posts: 61
Likes: 0
Installing New Spring Clamps...
I am rebuilding my rear springs today. I have already tore them down, installed new bushings, removed leaves to lower, and now I am ready to reassemble but I am not sure how to install my new spring clamps. I bought the clamps from Mid Fifty and they are shaped like a U with a bracket that slips over the top, but do I bend the top of the U out over the side of the clamp or bend it over the top of the bracket? I may be over thinking this but I want to make sure I do it right. Anyone used these before that could give me some advice or a picture of one installed?
Thread Starter
|
Junior User
Joined: Sep 2011
Posts: 61
Likes: 0
Not on these. Just the U shaped lower part and the bracket that fits on top...so I take it the top part of the U is to be hammered down to hold it in place? And if so is it hammered over the top or sides?
Thread
Thread Starter
Forum
Replies
Last Post
chetspencer
1957 - 1960 F100 & Larger F-Series Trucks
17
Mar 17, 2014 09:09 AM
polarspeed
1948 - 1956 F1, F100 & Larger F-Series Trucks
1
Jul 29, 2011 04:02 PM
workingdog
1967 - 1972 F-100 & Larger F-Series Trucks
1
Oct 22, 2005 06:06 PM
