Lets see your engine now !
Cross-Country
Joined: Apr 2008
Posts: 62
Likes: 20
From: Langley, B.C.
Trending Topics
Cargo Master
Joined: Sep 2010
Posts: 3,427
Likes: 48
From: Hot AZ (Phoenix Valley)
Here's mine... early 70's Ch3vy 350-th350. I rebuilt the heads, replaced the CAM and lifters (PO put in a racing cam and didn't rework the low end to work with that cam, another words chewed up the cam and lifters) I replaced it with a mild RV cam...
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Freshman User
Joined: Jun 2009
Posts: 45
Likes: 0
From: Southern Ontario, Canada
Here's mine!
After I have fabbed up the mounts in the frame and then painted the engine, I am going to swap out the old heads and intake for the OFFY triple duece and heads that I have for it.
Dave
After I have fabbed up the mounts in the frame and then painted the engine, I am going to swap out the old heads and intake for the OFFY triple duece and heads that I have for it.
Dave
Thread Starter
|
Junior User
Joined: Jan 2012
Posts: 63
Likes: 0
From: Southern England
Damm you gotta love this place , such a diverse variation on motors , states of tune etc etc .... BUT .. I forgot my 351 thats going in , so here goes nothing !
As I'm going for the "survivor" look ... the guys at the speed-shop have been told NOT to clean-it and have even found a used air-filter to go on .... love re-cycling !
The box at the front is a C6 which has already been bolted up for mock-up , where as the box in the background is an FMX which came off a 390 Thunderbird and was'nt going anywhere near to my 351W !
Laters
Greg
As I'm going for the "survivor" look ... the guys at the speed-shop have been told NOT to clean-it and have even found a used air-filter to go on .... love re-cycling !
The box at the front is a C6 which has already been bolted up for mock-up , where as the box in the background is an FMX which came off a 390 Thunderbird and was'nt going anywhere near to my 351W !
Laters
Greg
Hotshot
Joined: Nov 2000
Posts: 11,591
Likes: 14
From: Pflugerville, tx
thats a beauty!! any more pics of the engine? We re putting same in a 29 Ford sedan ratrod....
did u rebuild it or have it rebuilt?
Sam
did u rebuild it or have it rebuilt?
Sam