Oil Cooler Problem!
Methanoholic
Joined: Mar 2009
Posts: 6,442
Likes: 8
From: Maine (NorCal Native)
On the IDIt it is mounted on the right (passenger side) rocker cover, just aft of the dip stick bracket. The Rocker Cover has a mount spot welded to the rocker cover.
With a N/A harness you'll have to do some wiring mods to move it there.
-Enjoy
fh : )_~
With a N/A harness you'll have to do some wiring mods to move it there.
-Enjoy
fh : )_~
Methanoholic
Joined: Mar 2009
Posts: 6,442
Likes: 8
From: Maine (NorCal Native)
The N/A motor has the controller mounted in the middle of the motor, to move it to the valve cover you will need to extend the left banks wires and shorten the right banks wires.
Best thing you could do is find a better place in the center to mount it ...
NMB2 mounted his on top/front of his turbo.
-Enjoy
fh : )_~
Best thing you could do is find a better place in the center to mount it ...
NMB2 mounted his on top/front of his turbo.
-Enjoy
fh : )_~
Thread
Thread Starter
Forum
Replies
Last Post
Texasdeereandhorse
1994.5 - 1997 7.3L Power Stroke Diesel
2
Jun 30, 2016 11:42 AM
