what am i doing wrong.gloplug
Thread Starter
|
Senior User
Joined: Mar 2006
Posts: 435
Likes: 0
what am i doing wrong.gloplug
i tried ohming my glo plugs. and im getting 0.0 just like you would on a good fuse. i saw where i should be at .6 -2.6. what am i doing wrong or do they sound good. thanks
Logistics Pro
Joined: Nov 2006
Posts: 3,679
Likes: 370
From: Fallon,NV & Bainbridge OH
I don't know how you are testingthem but one lead to the glowplug terminal and the other to a good ground away from the glowplug. If your leads are long enough you should not need to move the ground for all glowplugs on one bank (maybe both banks).
Try again and don't try to ground at the glowplug which I would guess is what you are trying to do.
Try again and don't try to ground at the glowplug which I would guess is what you are trying to do.
Logistics Pro
Joined: Jun 2005
Posts: 4,243
Likes: 16
From: AZ
Can't tell you what you are doing wrong unless I was watching 
...BUT...here is a complete "how-to" on testing the system.
...BUT...here is a complete "how-to" on testing the system.
Cargo Master
Joined: Aug 2009
Posts: 2,137
Likes: 13
From: Glendive, MT
The common pin is not a ground. You can get a 0.0 reading if you are using the wrong scale on the meter. For example my meter has a 2m, 200k, 20k, 2k, and 200 ohm settings. You would want to use the 200 ohm setting for glowplugs.
Thread
Thread Starter
Forum
Replies
Last Post
powerstroker100
1999 - 2003 7.3L Power Stroke Diesel
39
Feb 16, 2012 04:13 PM
