Tekonsha prodigy install pictures
Thread Starter
|
New User
Joined: Aug 2002
Posts: 14
Likes: 0
Tekonsha prodigy install pictures
I am planning on getting a prodigy controller, and was hoping someone could post pic's of their superduty install, and maybe a suggestion on where to buy, I have been considering EvilBAY.
Posting Guru
Joined: Nov 2002
Posts: 1,535
Likes: 1
From: I'm lost somewhere in NJ -- can someone please find me?!?!?!?
Tekonsha prodigy install pictures
First, let me say that from all the comments I have read on this board, you made the right decision going with the Prodigy.
http://www.brakecontroller.com has the units for $125 including free shipping.
On Ebay, they normally go for $100-$110 + $10 shipping (not to say you won't find a bargain if you hunt & wait long enough). I would skip Ebay and pay the extra $5-$15 to buy it from a proven reputable source. Your mileage may vary.
I think nafzimo has a pic of his (Dang it man, when are you gonna' make a gallery?!?!?!) lying around somewhere. Some guys also chose to install it in the "useless junk cubby" in the dash.
http://www.brakecontroller.com has the units for $125 including free shipping.
On Ebay, they normally go for $100-$110 + $10 shipping (not to say you won't find a bargain if you hunt & wait long enough). I would skip Ebay and pay the extra $5-$15 to buy it from a proven reputable source. Your mileage may vary.
I think nafzimo has a pic of his (Dang it man, when are you gonna' make a gallery?!?!?!) lying around somewhere. Some guys also chose to install it in the "useless junk cubby" in the dash.
Senior User
Joined: Mar 2003
Posts: 106
Likes: 0
From: Cameron MO
Tekonsha prodigy install pictures
If you look through thread <a href="https://www.ford-trucks.com/forums/showthread.php?s=&threadid=107722" target="_blank">107722 - trailer brake controllers</a>, nazfimo did post a pic of his mounted below the cubby, and some others talked about drilling a small hole and mounting it <b>in</b> the cubby (no pics though).
Posting Guru
Joined: Jun 2002
Posts: 1,067
Likes: 1
From: Central Illinois
Tekonsha prodigy install pictures
Originally posted by haroutd
...I think nafzimo has a pic of his (Dang it man, when are you gonna' make a gallery?!?!?!) lying around somewhere.
...I think nafzimo has a pic of his (Dang it man, when are you gonna' make a gallery?!?!?!) lying around somewhere.
Matt
Senior User
Joined: Dec 2002
Posts: 192
Likes: 0
From: Shamokin USA
Tekonsha prodigy install pictures
I have a Prodigy and love it. Had the Voyager before, which worked fine. The Prodigy seems to take all the thinking out of the equation, The thing is foolproof. It looks cool too. I mounted it in the useless cubby. Drilled a small hole to pass the wires through and fastned the unit with 3M plastic velcro. This is the industrial type that is not fabric nor furry. Hard to find. Most hardware stores will have it , though. I don't have any pics. Will try to get a gallery up soon.
Jimmie
2003 F250SD SB SC XLT 4X4
Jimmie
2003 F250SD SB SC XLT 4X4
Thread Starter
|
New User
Joined: Aug 2002
Posts: 14
Likes: 0
Tekonsha prodigy install pictures
thanx for the place to buy and the discussion link, I was kinda looking for the cubby pic, but maybe I can make my own and post it when I get done. this board was what made me decice on the prodigy, there is a lot of knowledge floating around here.
thanks again,
Ryan
thanks again,
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
StevieD6262
1999 - 2016 Super Duty
4
Aug 6, 2013 08:56 PM
Greywolf
All Things Towing
35
Mar 31, 2007 10:33 PM
