frame flex

Reply Subscribe

Thread Tools

Search this Thread

Sep 24, 2011 | 06:34 PM

rangergirl94

Thread Starter

Elder User

Joined: Dec 2010

Posts: 656

Likes: 4

From: Geneva,Ohio

frame flex

i have single cab short bed 93 150 i had to back up on a gravel pile to pull a friend out i noticed my bed was touching my cab where the body lines are is this my frame flexing or body mounts? how do i fix it or stiffin it up? sorry i like having a perfect truck lol

Sep 24, 2011 | 07:00 PM

Eddiec1564

Cargo Master

Joined: Mar 2007

Posts: 2,935

Likes: 34

From: Arcadia, Fla

Check the cab mounts and see if they are bad. But some flexing is normal. Depending how high up one side is, it can flex alot!

Sep 24, 2011 | 07:04 PM

jplinville

Posting Guru

Joined: Oct 2009

Posts: 1,431

Likes: 1

From: Ohio

Flex is normal...it's designed to do that. If it didn't, then it would break.

Sep 24, 2011 | 07:17 PM

GoinBoarding

Cargo Master

Joined: Mar 2010

Posts: 3,320

Likes: 287

From: Laramie, WY

Hmm. I have a super cab short bed, never had the cab and box touch. And I've flexed hard enough to lift a wheel. Doors wouldn't open, but there was no cab to box touching.

Sep 24, 2011 | 08:54 PM

rangergirl94

Thread Starter

Elder User

Joined: Dec 2010

Posts: 656

Likes: 4

From: Geneva,Ohio

The mounts look fine my gfs 94 supercab ranger has 0 flex body lines stay straight doors always open no matter the angle

Sep 24, 2011 | 11:25 PM

Bankrupter

Elder User

Joined: Mar 2011

Posts: 923

Likes: 1

From: North Central MA

I'd be worried about a full frame vehicle that the doors would not open on inclines. uni-body like a XJ I can see it..

box/body touching, I would be looking for cracks in the frame if all you mounts are good.