When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i have a 1979 ford bronco with a 351M and C6 4x4 i recenly replaced the starter ,relay,and ignition switch but the problem is when in te run position the starter keeps cranking the engine
Did this start after the replacements or is that why every thing was changed? If you did all of this to correct the problem sounds like a short in the wiring harness puling the selenoid.
sorry for not getting back here sooner things came up to answer thows question to my post i fixed it. it turned out to be the neutral safty switch so thank all that replied
starter problem
