I cannot stand beans (ask glenn for more info on that) and swamps are crooks too.

I'd modify IDM's for guys on here, but them I'm responsible if it breaks. and I cannot afford that.

 

were could i find the resistors at just any local hardware store?

 

naw, you'll have to order them from digikey or someplace like that.

I bought a bunch to send out to guys who wanted to do it, but I cannot find them.

 

first you need to make sure what voltage your idm is now. mine was a 110v when i started, so i had to use differnt resistors. Brownies write up is for a 100v idm

 

will it tell me what volt my IDM is on the box or do i need to look it up some where ?

 

There is a sticker on the idm

 

Talyn is 100% correct. Beans and Swamps have a rip off mentally. They both will answer the phone on the first ring and then take your money. After that, good luck in getting ahold of them for any help or whatever you need. There voice mail boxes will be full and there are no email replies. Trust me, don't give them your money!!!