Engine Swap
Thread Starter
|
New User
Joined: Mar 2011
Posts: 4
Likes: 0
Engine Swap
Hi, I have a 76 F250 Ranger highboy with a 2" lift and I am about to pick up a
351 cleveland 2V to replace the 302. I want the truck to be able to haul a boat and camper so I was wondering if it would be worth picking up 4v heads or would the 2v heads be sufficient? Thanks.
Lance
351 cleveland 2V to replace the 302. I want the truck to be able to haul a boat and camper so I was wondering if it would be worth picking up 4v heads or would the 2v heads be sufficient? Thanks.
Lance
Thread Starter
|
New User
Joined: Mar 2011
Posts: 4
Likes: 0
othThe guy I got it off of put the 302 in. I will ask him about that. Will the 351 mount right up to the bellhousing?
Trending Topics
Senior User
Joined: Oct 2010
Posts: 188
Likes: 0
I don't think so, but I know there has been a thread covering bell housings for small blocks and the clevelands, and NumberDummy broke it down by part number.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Senior User
Joined: Oct 2010
Posts: 188
Likes: 0
found it - if that doesnt help its a good place to start (could go through the original posters previous posts to figure out the one referenced)
https://www.ford-trucks.com/forums/1...ith-a-sbf.html
hope that helps
https://www.ford-trucks.com/forums/1...ith-a-sbf.html
hope that helps
More Turbo
Joined: Dec 2013
Posts: 647
Likes: 10
From: SOUTHBURY CT
Hi, I have a 76 F250 Ranger highboy with a 2" lift and I am about to pick up a
351 cleveland 2V to replace the 302. I want the truck to be able to haul a boat and camper so I was wondering if it would be worth picking up 4v heads or would the 2v heads be sufficient? Thanks.
Lance
351 cleveland 2V to replace the 302. I want the truck to be able to haul a boat and camper so I was wondering if it would be worth picking up 4v heads or would the 2v heads be sufficient? Thanks.
Lance
Thread
Thread Starter
Forum
Replies
Last Post
Scopie
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
7
Oct 5, 2004 07:08 AM
