When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
my buddy wants to buy a '76 f-2504x4 and drop a cummins 24 valve in it. pros and cons? any advice? i know ya'll are sharp on these and i want all the input i can get. thanks in advance.
I don't know a lot about it but from what I have read and hear it's a fairly popular swap.
I don't think that the cummins weighs as much as the PSD so that in it's self is a plus and with the right mods that cummins can be one hell of a contender.
I just know others more knowledgeable than I will will give more info.
Thats my dream swap! I would not do a 24 valve common rail though. The 12 valve would be the easiest and the 24 valve IP engine would be the middle ground. The 12 valve is simple and still one of the most powerful engines when modded.
I was very impressed with what the Cummins 12V can do on our local dyno day back in Dec 07. Most of them were over 500hp with a few, not very expensive mods, compared to what it would take to get 500hp out of a 7.3.