broken lug nut stud
#1
#2
#3
#4
There is supposed to be a wheel stud access plug in the dust shield. You can use a punch to remove the plug. Then you will have an access hole large enough to fit the stud through. The hole is located behind the parking brake shoe adjuster and appears to be the same hole that would be used to adjust the parking brake. You need to remove the rotor, then remove the parking brake adjuster and bottom spring before punching out the cover. The manual suggests the plug can be reinstalled.
If you want a PDF of the procedure from the factory service manual that shows images, send me a Private Message with the specific request.
-Rod
If you want a PDF of the procedure from the factory service manual that shows images, send me a Private Message with the specific request.
-Rod
Thread
Thread Starter
Forum
Replies
Last Post
camodown
1999 - 2003 7.3L Power Stroke Diesel
131
11-03-2020 09:10 AM
djmichael24951
1987 - 1996 F150 & Larger F-Series Trucks
6
03-06-2014 08:55 PM
salewit
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
13
04-12-2005 02:25 PM
troach
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
07-31-2003 08:26 AM