any one make a cold air intake? I'm looking for ideas .
#1
any one make a cold air intake? I'm looking for ideas .
I'm looking to build a cold air system for my 69 F 250 390 with Holly carb I've seen some mid 90s trucks with throttle body inj have the hard plastic top that bolts on the the throttle body like a air cleaner then a hose goes to the box were the filter is and it sucks air either from the front or under the fender well . I just don't know what years will fit a Holly carb and what box to use any one just swap one off a suburban or something any ideas ? I seen a guy had a scoop type thing on his hood with a hose to the carb .
#2
I remember that HioSilver and someone else had a thread about ducting in cold air. Do a search, see what you find.
It is under the "Read this First" article by HioSilver, on pg 2 Cool and Custom Lo-Buck Cold Air Dual Snorkel Air Cleaner
It is under the "Read this First" article by HioSilver, on pg 2 Cool and Custom Lo-Buck Cold Air Dual Snorkel Air Cleaner
Thread
Thread Starter
Forum
Replies
Last Post
rdspider
Performance & General Engine Building
6
12-13-2005 02:57 PM