a question about transmission cooler hose
#1
a question about transmission cooler hose
i figure the answer will be no but it never hurts to ask. what i am wondering is if i can use clear vinyl tubing with the braided reinforcement as lines to a transmission cooler. i am replacing the factory cooler with a much larger one and was wondering purely for looks since the hose will easily be seen through the grill.
#4
i figure the answer will be no but it never hurts to ask. what i am wondering is if i can use clear vinyl tubing with the braided reinforcement as lines to a transmission cooler. i am replacing the factory cooler with a much larger one and was wondering purely for looks since the hose will easily be seen through the grill.
#5
#7
To answer multiple questions in one reply. yes it is like the stuff from the hardware store, how ever it has a pressure rating of 180psi. the working temperature is only 150 i think. it did state that it was chemical resistant but not proof. i figured it was a no go but thought it never hurt to ask. i will check the local hydraulic shop just for grins and giggles though. thanks for the quick answers.
Trending Topics
#8
i was still looking and came across this stuff....any thoughts?
https://www.gvc.net/p/3389/size-18id-through-38id
https://www.gvc.net/p/3389/size-18id-through-38id
#9
Thread
Thread Starter
Forum
Replies
Last Post
tubolove
1994.5 - 1997 7.3L Power Stroke Diesel
1
06-01-2008 01:08 PM