When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
requirements: you must have AMBIENT LIGHTING from the factory(you can add ambient lighting but theres more to it than im going to cover in this thread).
you need these parts in addition to the harness
QTY 1: HC3Z-14A318-C cup holder light ring
QTY:1 HC3Z-14A318-E wire assembly with LEDs
open your console
grab the 2 silver corner pieces and pull up the console will pop free
unhook this connector it goes to the key reader/programmer, then work your way to the front of the console near the radio. youll need to pull up and back to release the front portion of the upper console.
now that you have your console out, remove the screws holding the cup holder together.
remove this band it holds tension on the cup retainers, I suggest not breaking this, I have yet to see where it can be ordered separately
on my cup holder I had to trim around the center screw a little bit to get the light ring to fit flush
now install the light ring
on your cup holder bottom youll need to bend the tension arms where ive circled in red this allows them to fit back in the cup holder properly. now reassemble the cup holders.
pass the harness through the console
now you need to connect your harness to the foot well ambient light. the first set of harness I have made(gray connectors) go to the drivers side foot well ambient light, going forward they will be going to the passenger side light which i will show you how to access.
open your glove box and disconnect the stop arm
drop your glove box down
gain access to the passenger side ambient light(black connector pictured with 3 wires)
hook up your cup holder lights
reinstall everything and enjoy what the Ford took from us!!
I would like one please I’ve already installed the lights just need to connect them
First post! Signed up for this forum specifically to order one of these. Also because I just bought a super duty and may need support, but mostly for this harness .
First post! Signed up for this forum specifically to order one of these. Also because I just bought a super duty and may need support, but mostly for this harness .
Please feel free to email me JHForman@ Gmail. Com take the spaces out obviously lol
+ 1 more for this great mod. Thanks @JHForman812 for the quality wire harness, fast shipping, and especially for the email exchange support during my install on a Saturday morning.
12-09-2022, 08:57 AM
.
