Brake Caliper Mounting Pins
Lead Driver
Joined: Apr 2001
Posts: 6,175
Likes: 21
From: Texas
Brake Caliper Mounting Pins
I am assuming you have succesfully removed the nut. Squirt with a penetrating lubricant and tap gently, repeat as time allows. You should be able to spin the pin with a decent size 1/2 inch ratchet. If it spins, you should be able to tap it out with a hammer. I was told these caliper pin kits are getting hard to find from the dealer, so be careful. I broke the end off one by tightening it too much. The dealer said he was lucky to find one.
Off course, yours may be different than those on my 69 F250.
Good Luck.
Off course, yours may be different than those on my 69 F250.
Good Luck.
Thread
Thread Starter
Forum
Replies
Last Post
jonezzzman
1999 - 2003 7.3L Power Stroke Diesel
1
Aug 13, 2016 06:54 PM
CropDusterMan
1961 - 1966 F-100 & Larger F-Series Trucks
4
Aug 10, 2011 08:33 PM
Jim59
1999 - 2016 Super Duty
2
Oct 26, 2006 04:55 PM
