vacuum tree/number dummy

Reply Subscribe

Thread Tools

Search this Thread

Jun 22, 2018 | 03:03 PM

beartracks

Thread Starter

Lead Driver

Joined: Nov 2000

Posts: 6,628

Likes: 345

From: Albuquerque

vacuum tree/number dummy

Looking for the aluminum vacuum tree in the back of my 400ci. Has four small ports and one 3/8" for the brake booster. Mine screws in too far. Some kind of sealant that wont shrink???

Jun 23, 2018 | 12:56 PM

beartracks

Thread Starter

Lead Driver

Joined: Nov 2000

Posts: 6,628

Likes: 345

From: Albuquerque

Any ideas?

Jun 23, 2018 | 01:13 PM

83sd

Tuned

Joined: Mar 2005

Posts: 479

Likes: 0

From: Mesa AZ

Teflon tape?

Jun 24, 2018 | 05:39 AM

rob8210

Tuned

Joined: Dec 2007

Posts: 323

Likes: 8

I use a sealant meant for gas connections. It comes in a stick from the local hardware store and works very well on threaded parts.

Jun 24, 2018 | 10:13 AM

NumberDummy

Ford Parts Specialist

Joined: Nov 2006

Posts: 88,826

Likes: 785

From: Simi Valley, CA

Quote:

Originally Posted by beartracks

Looking for the aluminum vacuum tree in the back of my 400ci. Has four small ports and one 3/8" for the brake booster. Mine screws in too far. Some kind of sealant that wont shrink???

387331-S100 .. Intake Manifold Vacuum Outlet Fitting - 5 way Tee assy. / Obsolete

1977/79 F100/350 351M/400. No Ford dealer or obsolete parts vendor has any.

Jun 24, 2018 | 11:30 AM

beartracks

Thread Starter

Lead Driver

Joined: Nov 2000

Posts: 6,628

Likes: 345

From: Albuquerque

Well Teflon tends to shrink as did the gas pipe sealant I used last time.

Jun 25, 2018 | 05:40 PM

bigoldtruck

Mountain Pass

Joined: Feb 2018

Posts: 108

Likes: 0

I have an aftermarket heat gauge sensor that screws into the manifold on my 390. With tube-type sealant it leaks. I wrapped a bunch of layers of teflon tape on the threads and it holds pressure. So far so good...two weeks now.