Im looking for a part number for the vacuum canister/tank that sits on the fender. Anyone have it? I've been tracing vacuum leaks all day on the esof system, and that seems to be the culprit. I can hold vacuum on each of the hubs, but when the canister is hooked up and inline, my vacuum pump runs all the time, even when not in 4x4. Must have a good sized leak somewhere in that canister....

Thanks in advance.

 

The dealer would probably have it...lol

 

I think this is it: 3Z-9E453-AA. EBay ad says egr cannister but the pic is right.

Can you plug it off except for the pump to see if it will hold?

 

Dealer couldn't pull a number today. Thank you for that number. I will have them look that up. Vacuum holds on the line to both hubs. Vacuum holds into the cab. Introduce this reservoir and no vacuum etc. I'm thinking its got a hole into it somewhere.

 

You could fab one fairly easily I would think.