93 4x4 rotors

Reply Subscribe

Thread Tools

Search this Thread

Sep 25, 2010 | 10:44 PM

LarryLF150

Thread Starter

New User

Joined: Sep 2010

Posts: 2

Likes: 0

93 4x4 rotors

i can't seemed to get them off i removed the ring around the spline then i tried to slide the looking hub off but it gets to the end the stops
i can't find out whats stopping it?

Sep 26, 2010 | 04:05 AM

Lazy K

Post Fiend

Joined: Jan 2005

Posts: 8,402

Likes: 10

There is another snap ring around the inside of the hub. It is like a thin piece of wire. You need a fine screwdriver to pry it out.

Sep 27, 2010 | 11:06 PM

LarryLF150

Thread Starter

New User

Joined: Sep 2010

Posts: 2

Likes: 0

i will seek this ring
is it in the front part of the hub

Sep 28, 2010 | 07:54 AM

rla2005

Fleet Owner

Joined: Oct 2005

Posts: 20,786

Likes: 1,751

From: Kentucky

Quote:

Originally Posted by LarryLF150

i will seek this ring
is it in the front part of the hub

Yes it is.

Sep 28, 2010 | 11:46 AM

jim henderson

Postmaster

Joined: Mar 2001

Posts: 4,968

Likes: 3

From: So Cal

It is about 1/4 to 1/2 inch in from the outside of the hub. It is kind of like a piston ring and sits in an inside groove of the hub. Find the gap in the ring and pry it out with a screwdriver, or something else pokey.

Hard to see due to grease, but you should be able to feel it with your fingers.

Good Luck,

Jim Henderson