Casting number confusion
Thread Starter
|
Senior User
Joined: Jan 2010
Posts: 415
Likes: 0
From: Califorina , Cypress
Casting number confusion
I have a 1994 - f-350 4x4 4 door xlt 460/v8 long bed.
every place i have called has told me my Casting number on my heads Are
F3TE's hell even rockauto.com said the same thing ..
Problem is i just took out my eninge for a rebuild and my heads are E8TE's ??
any advice ?
i am the sec owner of my truck , and i can not locate the Org owner,
when the motor was pulled out it looked like the Org engine from the factory ..panit job and all any advice ?
thxs jayson
every place i have called has told me my Casting number on my heads Are
F3TE's hell even rockauto.com said the same thing ..
Problem is i just took out my eninge for a rebuild and my heads are E8TE's ??
any advice ?
i am the sec owner of my truck , and i can not locate the Org owner,
when the motor was pulled out it looked like the Org engine from the factory ..panit job and all any advice ?
thxs jayson
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Back when these trucks were made engine castings were not modified every year so it is quite possible to have E8(1988) heads on a '94 truck. I don't know the big block motors at all so I can't say what casting numbers do exist but as an example the E7TE(1987) SBF heads were used on regular production small block V8's right up until 1997.
Thread
Thread Starter
Forum
Replies
Last Post
bunchoftrucks
1961 - 1966 F-100 & Larger F-Series Trucks
7
Dec 16, 2011 07:51 AM
FordTrucksKickGM
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
11
Aug 24, 2006 05:47 AM
rusty79
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
16
Apr 28, 2001 08:07 AM
