Slipping Cup Holder
Thread Starter
|
Mountain Pass
Joined: Jan 2009
Posts: 148
Likes: 1
Slipping Cup Holder
The cup holder in my 2001 won't stay closed. I've searched for info on this forum and haven't found anything. I've tried taking it apart but can't figure out how to tighten it. Has anyone else had this problem? How did you fix it? Here's a pic of the cup holder. After a few minutes of driving it pops out this far and stays there. - Brian
Cargo Master
Joined: Mar 2006
Posts: 2,502
Likes: 2
From: Bend Oregon
thats a new one to me...
Might try a junkyard cup holder, if it works you can swap the dash colored handle on the front so everything matches. That is what I did when I upgraded from my "cup ejector" in my 2000 to the same cupholder you have.
Might try a junkyard cup holder, if it works you can swap the dash colored handle on the front so everything matches. That is what I did when I upgraded from my "cup ejector" in my 2000 to the same cupholder you have.
Cargo Master
Joined: Mar 2006
Posts: 2,502
Likes: 2
From: Bend Oregon
here is a link mine was built nov 99, The original cup holder was more like a shelf...real bad deal.
this link may have some useful info for the OP as well
this link may have some useful info for the OP as well
Cargo Master
Joined: Apr 2009
Posts: 2,135
Likes: 0
From: Man Cave
Reading through the threads I thought this one was a joke. Lol its fair dinkum. Cant help ya m8 Aussie trucks dont have em. We just hold our beer in one hand with the elbow out the door and drive with the other.
Lead Driver
Joined: Sep 2005
Posts: 9,399
Likes: 188
From: Norco,CA
Waltdog, What do you want for the cup holder. I have a e99 and somebody said you can just change the front handle. I'd really like to have a cup holder that does its job!
Thanks Chet, Bonanza35
Thanks Chet, Bonanza35
Trending Topics
of American machinists
Joined: Oct 2004
Posts: 1,014
Likes: 0
From: NORTH IDAHO
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Senior User
Joined: Apr 2009
Posts: 444
Likes: 0
From: southeast Texas
cant help but i have been thinking of mounting a volt gauge, and could not figure where it would look good and i could see it, but not be bothered with seeing it.
i like where you have yours.
did you get the votdage from the extra power piont neer it or run a wire from the bat.
i like where you have yours.
did you get the votdage from the extra power piont neer it or run a wire from the bat.
Lead Driver
Joined: Sep 2005
Posts: 9,399
Likes: 188
From: Norco,CA
Waltdog, please pm me at home at ablesprinklercorp@charter.net. I'll be glad to pay the shipping, I can't wait to have a cup holder that works! Mine broke a while ago and I've spilled more cups out of it then I can remember, Thanks Chet
