Clutch Question
Thread Starter
|
New User
Joined: Jul 2010
Posts: 9
Likes: 0
From: Edmonton, AB
Clutch Question
Hey guys. im new to this forum, but for the past few days i've been on here reading like crazy, and answering many questions of mine. But anyways i've got a new one. I'm gonna be doing the clutch in my truck pretty soon, and i was just wondering if anyone on here knew what brand of clutch would be the best to use, and anything to watch for or any pictures of what they did. My truck has the 6.9l with the 4 speed manual.
Thanks guys.
Thanks guys.
Tuned
Joined: Nov 2002
Posts: 348
Likes: 0
From: Benson, AZ
When replacing the clutch replace the clutch, Pressure plate ,throwout bearing and pilot bearing. also pull the flywheel and inspect the ring gear for broken teeth and then have it turned to spec.
Also while you are in there replace the rear main seal just because replacing a $30 seal is alot better then pulling the tranny a second time. BTW I would use a Luk clutch kit
Also while you are in there replace the rear main seal just because replacing a $30 seal is alot better then pulling the tranny a second time. BTW I would use a Luk clutch kit
Thread
Thread Starter
Forum
Replies
Last Post
JustBlaze
1973 - 1979 F-100 & Larger F-Series Trucks
1
Mar 29, 2012 11:12 PM
