Missouri - general chat-AUG
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,189
Likes: 5,792
From: S/W Missouri, Polk county
Well good evening here, its 11:30 PM here from across the pond, yep they dropped the bomb at 0900 fri am, "hay you are flying out today at 3:00 PM.
Shifted gears and reloaded for a few weeks over here, it sux, but its work. Chip the spring hanger will be in the mail on monday.
Hang in there all.
Shifted gears and reloaded for a few weeks over here, it sux, but its work. Chip the spring hanger will be in the mail on monday.
Hang in there all.
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
We're have a small get together in the driveway this evening for Mr Tim's 16th B'Day tomorrow. Rich..... Son just KEEP YOUR HEAD DOWN!!!!!!!!!!!!
We'll all hook up, you know what you have to do, knock it out, be safe.
Unk Bob
We'll all hook up, you know what you have to do, knock it out, be safe.
Unk Bob
Thread Starter
|
Postmaster
Joined: Jan 2005
Posts: 3,876
Likes: 0
From: Hollister MO
Redid the brakes on the back of a 79 E250 today, not a hole lot of fun.
It sucks that your gone Rich
, but the sooner you leave the sooner you come home!
Im about 4 tall boys in to beer:30, Some one text me.
It sucks that your gone Rich
, but the sooner you leave the sooner you come home!Im about 4 tall boys in to beer:30, Some one text me.
Lead Driver
Joined: Aug 2009
Posts: 7,565
Likes: 249
From: Laquey, MO
Wow Rich - talk about little warning.
Here's what we were up to today...
Much better than doing the brakes on a '79 E250
Had they been done since '79? 
Wish Mr. Tim a happy 16th birthday from this direction Unk Bob!
Hey Lee - Photobucket ROCKS and its free!
Here's what we were up to today...
Much better than doing the brakes on a '79 E250
Had they been done since '79? Wish Mr. Tim a happy 16th birthday from this direction Unk Bob!
Hey Lee - Photobucket ROCKS and its free!
Thread Starter
|
Postmaster
Joined: Jan 2005
Posts: 3,876
Likes: 0
From: Hollister MO
Yes PO used a chisel to remove spindle nut and to re tighten it, broke one brake line nut, I did have to buy the 2-9/16 spindle nut socket and on new nut. I like new tools.
Lead Driver
Joined: Aug 2009
Posts: 7,565
Likes: 249
From: Laquey, MO
From what I've read that spindle nut tool is almost a must for doing the brakes right. I am so happy that I have rear drums and only have to deal with it unless I'm getting the rotors turned.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Postmaster
Joined: Jan 2005
Posts: 3,876
Likes: 0
From: Hollister MO
Think you might have something wrong here.
Lead Driver
Joined: Aug 2009
Posts: 7,565
Likes: 249
From: Laquey, MO
Ya think! 
That's why I should not be posting after paddling all day. I MEANT to say rear discs...
Next thing you know I'm going to be checking the web for a great deal on blinker fluid.....
Thanks Ches!
That's why I should not be posting after paddling all day. I MEANT to say rear discs...
Next thing you know I'm going to be checking the web for a great deal on blinker fluid.....
Thanks Ches!
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,189
Likes: 5,792
From: S/W Missouri, Polk county
I have a gallon of the new synthetic tail light/blinker fluid and it can be used for convert rust to carbon fiber, $5.oo cause its not a full gallon, I used some on my hood thats all carbon fiber now.
Dave looks like a nice time floating, I haven't done that in years.
Happy b-day there Tim, drive safe, stay calm Unk Bob.
How's married life for you Terry? Tell all "Howdy from us"
Lee get your truck all done? How ya been, overseas job hunting any?
Ches glad you are side job busy?
Dave looks like a nice time floating, I haven't done that in years.
Happy b-day there Tim, drive safe, stay calm Unk Bob.
How's married life for you Terry? Tell all "Howdy from us"
Lee get your truck all done? How ya been, overseas job hunting any?
Ches glad you are side job busy?