steering/Rag joint

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2010 | 07:17 AM

desoto dave

Thread Starter

Senior User

Joined: Aug 2008

Posts: 141

Likes: 0

From: north carolina

steering/Rag joint

I have a 68 f350, and I'm replacing the manual steer box with a new one.
Well the coupler that is attached to the
Input shaft and is holding the rag joint is shot. No stores
Sell them, and LMC is not comming up with any thing for me, so any
Dirrection where to get that part would be great. Its a v8
Truck,manual steer,manual trans on the floor,bud wheels,
I guess that's all ya need.

Jun 18, 2010 | 07:43 AM

NumberDummy

Ford Parts Specialist

Joined: Nov 2006

Posts: 88,826

Likes: 784

From: Simi Valley, CA

Quote:

Originally Posted by desoto dave

I have a 68 f350, and I'm replacing the manual steer box with a new one. Well the coupler that is attached to the Input shaft and is holding the rag joint is shot.
It's a one piece assembly.

No stores sell them, and LMC is not coming up with any thing for me, so any direction where to get that part would be great.

Its a v8 Truck, manual steer, manual trans on the floor, bud wheels.

C9UZ3A525A (replaced D3TZ3A525A, C9TZ3A525B & C9TZ3A525A) .. Steering Coupler Assy (rag joint) / Obsolete

This coupler is very hard to find. When I first listed the part number, there were 30. I've listed it several times since, including last week-there were 3. Now there's only 1.

Fits: 1969/74 F100/250 2WD // 1969/74 F350 // 1969/74 Econoline // 1975 F100/250 2WD & F350 all 1975's with Manual Steering.

This coupler bolts to the flange of the steering shaft, has a splined end that slides over the gearboxes input shaft. Has a through bolt that tightens it up.