Ball Joint Problem
Thread Starter
|
New User
Joined: Dec 2009
Posts: 17
Likes: 0
Ball Joint Problem
Went to replace my lowers. Got it out ok but discovered the are not the original joint. Problem is they are over sized and now the hole is to big. You can push the new ball joints in with your hand.
Not sure how to fix. Thinking about bitting the bullit and ordering new upper and lower arms and just fixing everything right.
Not sure how to fix. Thinking about bitting the bullit and ordering new upper and lower arms and just fixing everything right.
Hotshot
Joined: Jul 2005
Posts: 11,931
Likes: 180
im wondering where the 1.760 ball came from ? If you get along with the Auto Parts store, you might ask to look at a ball that fits a few years newer and few years older truck and see if they changed sizes ? If they would let you look at several in stock, maybe you could find one that fit. I will bet it came off another truck, and not a double overisze for the EXP.
Thread
Thread Starter
Forum
Replies
Last Post
Old Blue
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
May 23, 2004 11:43 AM
agillings
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Oct 26, 2000 12:40 PM
