When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i was talkin to someone the other day and they had mention that over dosing on fuel additive could be bad? anyone ever hear anything like that? reason i ask is i always use powerservice but never measure just dump some in
You can dump an entire bottle in each tank, it just becomes less cost effective. The recommended dose gets the job done but what is different than when we fill a fuel filter and clean it out that way. That is running on pure additive at that point. Dont worry, it is not true with PS, howes, or Stanadyne, etc etc. Is there an additive that can harm if overdosed? probably not. Just use common sense and keep truckin!!
Our guys try to use the proper ratio of 1 L (32 Oz) to 2880 L (640 gal) Fuel. Putting in more of their Shellbourne Fuels catalyst does nothing but waste their cash. They get 6-8% lower fuel bills which is not too shabby given the black smoke issue is resolved at same time. Instant start is Everything! esp at 45-below.