Edge Programming Question
Thread Starter
|
Posting Guru
Joined: Sep 2006
Posts: 1,263
Likes: 17
From: New Castle, PA
Edge Programming Question
Im running the canned level 2 on my 4.6. When im cruisin along with the truck run up through all the gears and the TQ locked, if i hit a hill at 1500-1600 RPMs or lower the truck has now power going up the hill and doesnt either downshift or unlock the TQ (i dont know which one it is) until the truck drops to about 1100 RPMs then kicks it in the butt. Is there anything that i can adjust in the Edge to prevent this, i just want it to kick in to get up the hill at like 1200-1300.
If i push the gas pedal down more, more than i think it should while going up the hill it will kick in to get up the hill.
Thanks guys.
If i push the gas pedal down more, more than i think it should while going up the hill it will kick in to get up the hill.
Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
mr.fordneck
1987 - 1996 F150 & Larger F-Series Trucks
13
Nov 8, 2011 03:58 PM
BarnieTrk
6.0L Power Stroke Diesel
12
Sep 28, 2010 09:05 AM
