360 to 390 conversion kits?
Super Moderator
Joined: Apr 2004
Posts: 34,491
Likes: 2,806
The kit from PAWS...what does it include and how much is it?
360 to 390 is simply the 390 crank and rods. The same pistons can be used, or a variety of others can be selected.
Usually you're going to find the 390 crank in a 390, so depending on which block is better you'd rebuild your 360 with the 390 crank & rods, or leave the 360 behind and rebuild the 390.
Every 5th or so thread here is about doing this, so read through a few pages....
360 to 390 is simply the 390 crank and rods. The same pistons can be used, or a variety of others can be selected.
Usually you're going to find the 390 crank in a 390, so depending on which block is better you'd rebuild your 360 with the 390 crank & rods, or leave the 360 behind and rebuild the 390.
Every 5th or so thread here is about doing this, so read through a few pages....
Thread
Thread Starter
Forum
Replies
Last Post
401477534
Performance & General Engine Building
4
May 10, 2017 07:33 PM
alfuson
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Jun 3, 2009 11:10 PM
1972 f-100 owner
1967 - 1972 F-100 & Larger F-Series Trucks
22
Jun 7, 2004 10:26 AM
