E4OD hard shifts
#16
#17
The shift RPM points are very low for all gears, but still jarring. One bit a clarity, do the engine codes and trans codes get pulled the same way with the process I read about here? Ford Fuel Injection How To Run a Self-Test Seems like the 1-> 2 shift and 2->3 are the harsh ones.
Doing so in a very short distance, say before you've gone some 80-100 yards after taking off from a stand still?
#18
yes, very quick upshifts at low RPMs, I will have to test the OD MPH. It does get into OD ok though and you can still use the button to shift out of OD. I am going to try pulling the codes this weekend and also disconnecting the battery to clear it. I will post the results. May be later Saturday as there is snow coming tonight.
Thread
Thread Starter
Forum
Replies
Last Post
myakkacracka
Clutch, Transmission, Differential, Axle & Transfer Case
13
06-16-2016 11:33 AM
1979F350/460
1973 - 1979 F-100 & Larger F-Series Trucks
12
07-14-2012 10:13 AM
TycoMax
1987 - 1996 F150 & Larger F-Series Trucks
8
03-04-2011 09:49 PM
Harfend
Ford Inline Six, 200, 250, 4.9L / 300
11
10-15-2010 07:46 PM