Edge Evoloution cs

Reply Subscribe

Thread Tools

Search this Thread

Feb 21, 2010 | 12:55 PM

wrenchinT444E

Thread Starter

New User

Joined: Feb 2010

Posts: 10

Likes: 0

Edge Evoloution cs

I have a 97 f 350 with an edge cs programmer I am having issues with the truck stalling when I snap the throttle quick, Just wondering if any one else had that same setup and if they had any problems with it

Feb 21, 2010 | 01:01 PM

Talyn

Hotshot

Joined: Oct 2003

Posts: 17,799

Likes: 104

From: Ashland City, TN

does it do it with the programmer unplugged?

Feb 21, 2010 | 01:16 PM

wrenchinT444E

Thread Starter

New User

Joined: Feb 2010

Posts: 10

Likes: 0

No just on level 2 and 3. I have spent hours on the phone with edge and they say there is nothing wrong

Feb 21, 2010 | 02:29 PM

Talyn

Hotshot

Joined: Oct 2003

Posts: 17,799

Likes: 104

From: Ashland City, TN

Edge tuners are not that great.
So, I'm not surprised there is a problem somewhere with them.

Sorry. =\

Feb 21, 2010 | 02:32 PM

Talyn

Hotshot

Joined: Oct 2003

Posts: 17,799

Likes: 104

From: Ashland City, TN

You know, you could try unplugging the Map Sensor and see if it does something different.

Feb 21, 2010 | 03:48 PM

wrenchinT444E

Thread Starter

New User

Joined: Feb 2010

Posts: 10

Likes: 0

I will give it a shot and see what happens. I think I may try and sell the tuner and get something a little more reliable, I just changed levels and then the truck would not start thats the fourth time it has done that.

Feb 21, 2010 | 04:39 PM

Talyn

Hotshot

Joined: Oct 2003

Posts: 17,799

Likes: 104

From: Ashland City, TN

sounds like you should reseat the chip in there.

I would pull the chip and see what happens.

Cause the chip either wasn't burned right, or it got fried with some static electricity.