Intercooler
New User
Joined: Feb 2010
Posts: 7
Likes: 0
From: Roseville CA
My 7.3 Powerstroke Intercooler is in front of the AC condenser on my IDI and I see no raise in the temp, empty I run at 180 deg. When I tow my 32' 5th wheel the highest temp I've seen during the summer in 100 deg weather is about 215 on the guage.
Thread Starter
|
Post Fiend
Joined: Oct 2007
Posts: 10,501
Likes: 5
From: Faibanks Ak.
lol it is the temp of the ac and the headpressure I am worried about.
Towcat as far as I know there is no rule against it. Everybody likes all the info we can get, but I have never done it. I tried the search on obn but had no luck.
Towcat as far as I know there is no rule against it. Everybody likes all the info we can get, but I have never done it. I tried the search on obn but had no luck.
Freshman User
Joined: Oct 2006
Posts: 48
Likes: 0
it's an old thread, but there's been a fair amount of input in the past.
enjoy.
Oilburners.net
New User
Joined: Apr 2012
Posts: 1
Likes: 0
Hey darrin! , im in the process of putting a 6.0 PSD into my 1991 F-350 4x4 Dually. Is your intercooler from a 1994-1997 7.3 PSD or a 1998.5-2003.5 7.3 PSD?
And where did you find it?
Postmaster
Joined: Aug 2010
Posts: 2,554
Likes: 7
From: Northern Arizona
I'm having a hard time seeing how I'm going to get my 7.3 IC to fit in my 7th gen bullnose truck. I found the photobucket link and saw the install, but my tape measure is telling me I would have to move the radiator and AC condenser back toward the engine because the grill on these trucks slant backwards at the bottom making it really tight just above the bumper. I was thinking about mounting it low and welding up a bumper with a 18" X 32" hole in it 
only problem is the outlets would end up in a horrible place to pipe it through the radiator support.
I read the fantastic 16 page OBN thread on IC's and a couple of threads here and I'm finally convinced it's worth doing, now just have to make it FIT!!!
I think the brick-nose truck owners have it a lot easier in this respect. (and no, I'm not changing my front clip 
)
Ford left about 1" space between the radiator and AC condenser, could this be compressed a bit? How about between the IC and the other radiators? Anyone put their AC condenser in front of the IC? It's about the same size as the 7.3 IC...
only problem is the outlets would end up in a horrible place to pipe it through the radiator support.I read the fantastic 16 page OBN thread on IC's and a couple of threads here and I'm finally convinced it's worth doing, now just have to make it FIT!!!
I think the brick-nose truck owners have it a lot easier in this respect. (and no, I'm not changing my front clip )Ford left about 1" space between the radiator and AC condenser, could this be compressed a bit? How about between the IC and the other radiators? Anyone put their AC condenser in front of the IC? It's about the same size as the 7.3 IC...
Last edited by Ford F834; Apr 13, 2012 at 10:33 AM. Reason: found the 7th gen install pics
Logistics Pro
Joined: Sep 2010
Posts: 4,411
Likes: 4
From: Victor, MT
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread
Thread Starter
Forum
Replies
Last Post
