bed/runningboard question
Thread Starter
|
Mountain Pass
Joined: Jul 2007
Posts: 131
Likes: 3
From: MA
bed/runningboard question
hey guys,
the seam between the running board and the bed extention, is that supposed to be fastened? the "flange/lip" of both of mine are not wide enough for any bolts to run thru. just wondering if they should be modified to bolt together. ( i have fiberglass boards and an aftermarket bed, so im just not sure what this seam was like on an original setup) i have the seam touching, almost butted together i assume thats how they are supposed to be? or did they overlap each other? any thots or pics?
thanks.. R
the seam between the running board and the bed extention, is that supposed to be fastened? the "flange/lip" of both of mine are not wide enough for any bolts to run thru. just wondering if they should be modified to bolt together. ( i have fiberglass boards and an aftermarket bed, so im just not sure what this seam was like on an original setup) i have the seam touching, almost butted together i assume thats how they are supposed to be? or did they overlap each other? any thots or pics?
thanks.. R
Fleet Owner
Joined: Jul 2004
Posts: 27,297
Likes: 1,059
From: NM
Is it on the road yet? I'm curious if it will rip the bolts out from the bed or RB's moving.
Freshman User
Joined: Nov 2009
Posts: 32
Likes: 0
Not on the road yet but I figured the bed is bolted to the frame and the boards are to so it would be alright. I hope my thought process was right.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
49fordf1
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
Jun 21, 2009 06:05 PM
sdetweil
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Feb 8, 2009 10:50 AM
