white smoke
Thread Starter
|
New User
Joined: Dec 2009
Posts: 3
Likes: 0
white smoke
I have a 7.3l IDI in an F350, '92.
Engine starts & runs normally.
When I accelerate to highway speed, then slowly roll my foot off the accelerator, so it is neither powering nor coasting, bucketloads of white smoke leave the pipe. Adding or subtracting power causes the smoke to stop.
I am turning into a public nuisance!
<!-- / message --> <!-- controls -->
Engine starts & runs normally.
When I accelerate to highway speed, then slowly roll my foot off the accelerator, so it is neither powering nor coasting, bucketloads of white smoke leave the pipe. Adding or subtracting power causes the smoke to stop.
I am turning into a public nuisance!
<!-- / message --> <!-- controls -->
Post Fiend
Joined: Jun 2006
Posts: 9,714
Likes: 2
From: White Mnt's,New Hampshire
welcome to FTE..
cold or warmed up motor ???
just so you know..your in the 99-03 PSD forum and we will help the best we can...we do have a OBS forum if you want to ask in there...
here is the link
https://www.ford-trucks.com/forums/forum117/
cold or warmed up motor ???
just so you know..your in the 99-03 PSD forum and we will help the best we can...we do have a OBS forum if you want to ask in there...
here is the link
https://www.ford-trucks.com/forums/forum117/
Thread
Thread Starter
Forum
Replies
Last Post
henrymiller1
1999 - 2003 7.3L Power Stroke Diesel
5
Jan 21, 2015 07:21 AM
